Temporary Mesh Fence Panels - Extended 40mm (2.5m)
Temporary Fence
Ideal for events, construction and civil projects.
Product Overview
The Extended 40mm Temporary Mesh Fence Panel sits on top of a standard 1.8m 40mm mesh panel and takes the fence to 2.4m. Its posts slot into the panel uprights, and the matching mesh keeps the run looking the same from top to bottom.
Key Features
- Final fence height when fitted: 2.4m (on a standard 1.8m 40mm mesh panel).
- 2.5m wide, matching the standard 40mm panel width.
- Extension posts slot into the 40mm panel uprights.
- Hot-dip galvanised steel frame.
- Welded mesh infill, with less wind load than solid hoarding.
Common Applications
- Climb deterrence on security-sensitive sites.
- Debris and dust containment on demolition or civil sites.
- Extra screening at events and public-facing sites.
- Raising an existing 40mm fence run without replacing the panels.
Technical Specifications
Summary
Specifications
Every product in the TFH range is tested to meet Australian safety standards.
You might also need
Blocks 40mm Yellow
High-visibility yellow recycled-rubber stabilising base block for 40mm temporary fence panels. Approximately 25 kg each, these bright yellow blocks are the preferred choice for road-side and traffic-adjacent fencing.
Braces 40mm
A diagonal steel brace for 40mm temporary fence panel runs, prevents toppling in wind or on busy sites. Used when mesh panels carry shade cloth or scrim.
Black Shade Cloth
Black UV-stabilised shade cloth, supplied in a 50m roll, the most popular colour for privacy screening and sun protection on temporary fences, construction hoardings and event perimeters.
Bunting / Flagging Rolls
Site Direct high-visibility bunting and flagging tape for marking hazards, exclusion zones, and site boundaries. Available in orange, blue, yellow, and green, plus a day/night reflective option.
